PDF全文下载：2017020091
张晓芳，卢聚贤，邓涛*
（青岛科技大学高分子科学与工程学院，山东青岛266042）
摘要:研究了氯化聚乙烯（CPE）用量对三元乙丙橡胶（EPDM）/三元尼龙（PA）热塑性弹性体（TPV）物理机械性能及反复加工后性能的影响。结果表明:随着CPE用量的增加，转矩流变仪TPV的转矩值增大，拉伸强度、撕裂强度和拉断伸长率先上升后不变；反复加工使撕裂强度、100%定伸应力、硬度和门尼黏度值变大，但拉伸强度和溶胀度基本保持不变。通过扫描电镜能明显看出，CPE提高了两相的相容性。
关键词:三元乙丙橡胶； 三元尼龙； 热塑性弹性体
中图分类号：TQ 333 文献标志码：A
引用格式：张晓芳，卢聚贤，邓涛.增容剂氯化聚乙烯对三元乙丙橡胶/三元尼龙热塑性弹性体性能和结构的影响\[J\].青岛科技大学学报（自然科学版），2017，38（2）：91-94.
ZHANG Xiaofang, LU Juxian, DENG Tao. Influence of compatibilizer of chlorinated polyethylene (CPE) on properties and phase of ethylene proylene diene monomer/ternary nylon EPDM/PA thermoplastic elastomer \[J\]. Journal of Qingdao University of Science and Technology（Natural Science Edition), 2017,38(2)：91-94.
Influence of Compatibilizer of Chlorinated Polyethylene (CPE) on Properties and Phase of Ethylene Proylene Diene Monomer/Ternary Nylon(EPDM/PA) Thermoplastic Elastomer
ZHANG Xiaofang, LU Juxian, DENG Tao
(College of Polymer Science and Engineering, Qingdao University of Science and Engineering, Qingdao 266042, China)
Abstract: The paper studies the influence of the content of CPE to EPDM/PA thermoplastic elastomer physical and mechanical properties and the performance after repeated processing. The results show that with the increase of CPE, the torque value of TPV increased, the tensile strength,tearing strength and the elongation at break increased at first and then remained unchanged. The tear strength, 100% modulus, hardness and Mooney viscosity becomes larger after repeated processing, but tensile strength and swelling ratio change small. We found that CPE can obviously improve the compatibility of the two phases by SEM.
Key words:ethylene propylene diene monomer; ternary nylon; thermoplastic elastomer
收稿日期：2016-01-21
作者简介：张晓芳(1990—)，女，硕士研究生.*通信联系人.
文章编号：1672-6987（2017）02-0091-04；DOI：10.16351/j.1672-6987.2017.02.014
