PDF全文下载:
201801013.pdf
文章编号: 16726987(2018)01008004; DOI: 10.16351/j.16726987.2018.01.013
雍占福, 王瑞华, 王文峰, 刘光烨, 黄兆阁*
(青岛科技大学 高分子科学与工程学院,山东 青岛 266042)
摘要: 通过有限元软件ABAQUS对三元乙丙橡胶材料单轴拉伸实验数据与超弹材料本构模型进行了应力应变曲线的拟合,主要对比了形变量在0~300%时消除Mullins效应后填充胶实验测得的应力应变曲线与Neo Hooke模型、Yeoh模型、ArrudaBoyce模型的拟合曲线。结果表明:应变量在150%以下,三者都有较好的拟合效果;应变量超过150%时,Neo Hooke模型拟合曲线会明显偏离实验结果;在应变量在0~280%之间,Yeoh模型和ArrudaBoyce模型拟合效果拟合较好;在应变量在280%以上,ArrudaBoyce模型最好。
关键词: 单轴拉伸; 有限元分析; Neo Hooke模型; Yeoh模型; ArrudaBoyce模型
中图分类号: TQ 336.9文献标志码: A
引用格式:雍占福, 王瑞华, 王文峰, 等. 基于ABAQUS炭黑填充三元乙丙橡胶超弹性本构模型的分析与比较\[J\]. 青岛科技大学学报(自然科学版), 2018, 39(1): 8083.
YONG Zhanfu, WANG Ruihua, WANG Wenfeng, et al. Comparison and analysis of rubber hyperelastic constitutive model based on ABAQUS\[J\]. Journal of Qingdao University of Science and Technology(Natural Science Edition), 2018, 39(1): 8083.
Comparison and Analysis of Rubber Hyperelastic Constitutive
Model Based on ABAQUS
YONG Zhanfu, WANG Ruihua, WANG Wenfeng, LIU Guangye, HUANG Zhaoge
(College of Polymer Science and Engineering, Qingdao Univesity of Science and Technology, Qingdao 266042, China)
Abstract: In this paper,the stressstrain relation was fitted between test data of EPDM rubber material in uniaxial tensile and data of hyperelastic material model from the finite element software ABAQUS, the main study is that the measured stressstrain curve of filedrubbber after eliminating Mullins effect in the strain of 0—300% was compared with the fitting curves of Neo Hooke model and Yeoh model.The results show that both of them have a good fitting effect when the strain is below 150%, Neo Hooke model′s fitting curve will significantly deviate from the experimental results when the strain is more than 150%.When the strain is between 0 and 280%, Yeoh model and ArrudaBoyce′s fitting effect is the better.ArrudaBoyce′s fitting effect is the best when the strain is more than 280%.
Key words: uniaxial tension; finite element analysis; Neo Hooke model; Yeoh model; ArrudaBoyce model
收稿日期: 20171101
基金项目: 山东省自然科学基金重点项目(ZR2016XJ001).
作者简介: 雍占福(1975—),男,高级工程师,博士研究生.*通信联系人.