学报
 网站首页  部门概况  编委会  投稿须知  制度文件  征订发行  下载专区  过刊(自科)  联系我们 
站内搜索:
当前位置: 网站首页 > 过刊(自科) > 2024年第6期 > 正文

原位熔体反应法制备MgAl2O4/Al复合材料 及其强化机理

2025年01月10日 22:02  点击:[]


全文下载: 20240608.pdf


文章编号: 1672-6987202406-0065-08DOI10.16351/j.1672-6987.2024.06.008


陈攀宇, 于坤良, 苏佳豪, 刘孟辰, 刘备, 张越敏, 李成栋*,  赵梅*(青岛科技大学 材料科学与工程学院,山东 青岛 266042)


摘要: 采用正交试验方法,以纯铝为研究对象,晶粒尺寸为评价指标,研究了氧化铜粒度、镁含量、搅拌温度及氧化铜含量对原位合成镁铝尖晶石细化效果的影响。研究结果表明,影响细化效果的因素列序排列顺序从大到小依次为镁含量,氧化铜粒径,搅拌温度,氧化铜含量。最佳工艺参数为氧化铜粒度5 μm,镁含量质量分数1%、搅拌温度675 ℃,氧化铜含量质量分数015%;此时,晶粒可细化至44 μm,极限抗拉强度,断裂伸长率,弹性模量分别由原样的841 MPa142%3 497 MPa提高到了1012 MPa183%4 085 MPa


关键词: 氧化铜; 熔体直接反应法; 铝基复合材料; 镁铝尖晶石


中图分类号: TG 13文献标志码: A


引用格式: 陈攀宇, 于坤良, 苏佳豪, . 原位熔体反应法制备MgAl2O4/Al复合材料及其强化机理[J. 青岛科技大学学报(自然科学版), 2024, 456): 65-72.


CHEN PanyuYU KunliangSU Jiahaoet al.  In situ MgAl2O4/Al composites prepared by direct melt method and its strengthening mechanismJ. Journal of Qingdao University of Science and TechnologyNatural Science Edition), 2024456): 65-72.


In Situ MgAl2O4/Al Composites Prepared by

Direct Melt Method and Its Strengthening Mechanism


CHEN PanyuYU KunliangSU JiahaoLIU MengchenLIU Bei

ZHANG YueminLI Chengdong, ZHAO Mei

(College of Materials Science and Engineering, Qingdao University of Science and TechnologyQingdao 266042China)


Abstract: Using the orthogonal test method, taking pure aluminum as the research object and grain size as the evaluation index. The effects of copper oxide particle size, magnesium content, stirring temperature and copper oxide content on refining effect of in-situ synthesized magnesium aluminum spinel were studied. The results show that the order of the factors affecting the grain refinement from large to small is magnesium content, copper oxide particle size, stirring temperature, copper oxide content. The optimum process parameter is copper oxide particle size 5 μm, magnesium mass content 1%, stirring temperature 675 ℃, copper oxide content 015%; at this point, the size of grain can be refined to 44 μmthe ultimate tensile strength, elongation and modulus of elasticity were increased from 841 MPa, 142% and 3 497 MPa of the original sample to 1012 MPa, 183% and 4 085 MParespectively.


Key words: copper oxide;direct melt reaction method; aluminum base composites; magnesium aluminum spinel


收稿日期: 2024-01-13

基金项目: 国家自然科学基金项目(51672145.

作者简介: 陈攀宇(1996—),男,硕士研究生.*通信联系人.


  • 附件【20240608.pdf】已下载

上一条:Mo微合金化对生物医用Mg-Zn合金 微观组织和腐蚀性能的影响 下一条:90%变形量的Pd40Cu合金在 热处理过程中的组织演变

关闭

 
  通知公告 更多>>
关于作者领取2026年第1期样刊...
关于作者领取2025年第6期样刊...
关于作者领取2025年第5期样刊...
关于作者领取2025年第4期样刊...
关于作者领取2025年第3期样刊...
关于作者领取2025年第2期样刊...
关于作者领取2025年第1期样刊...
关于征集2025年《青岛科技大...
学报编辑部举办“戴尊红副主...
  期刊入口 更多>>
学报(社会科学版)网站入口  
PolyChem网站入口  
学报(自然科学版)作者投稿系统  
学报(自然科学版)专家审稿系统  
学报(自然科学版)编辑办公系统  

©版权所有:青岛科技大学 期刊中心  地址:山东省青岛市崂山区松岭路99号图书馆楼5040 邮编:266061